Absorbent Cotton Mop | Efficient Cleaning White

The Water-Absorbent Mop (White) features a PVA foam mop head that is temperature-controlled and foamed, becoming soft upon contact with water. It can quickly absorb water and remove dirty water and oil stains. Combined with the folding wringing mechanism, the mop head does not need to be touched by hand during wringing, making mopping, water absorption, and cleaning corners more convenient.

Product Features

• PVA foam mop head, quick-softening and highly absorbent: The high-quality PVA material is temperature-controlled and foamed, becoming soft upon contact with water without the need to wait. The mop head is 28 cm wide and approximately 5 cm thick (as indicated in the product images).
• Ultra-dense V-shaped grooves: Dust and hair are not easily allowed to pass through. The product images show a set of large and small scrapers for removing fine dust particles.
• Folding wringing, no hand washing: Simply pull the handle to fold it for a second wringing (triangular compression head, as indicated in the product images). The mop head can be cleaned with a quick rinse.
• Snap-fit installation: No screwdriver or complicated steps are required; the mop head can be replaced by simply snapping it into place.
• Double locking buckle: Features an inner lock and an outer lock design (as indicated in the product images), making it less likely to slip off during use.
• Stainless steel telescopic pole: The main image indicates a stainless steel pole with a telescopic design. The end of the pole can be hung vertically to dry and prevent dampness.
• Edge cleaning: The sides of the mop head are flat, allowing dust to be removed from corners and baseboards.

Specifications

Usage Scenarios

Cleaning kitchen oil stains and bathroom standing water; daily mopping of wooden floors and tiled floors; cleaning dust from corners and baseboards; dry mopping to absorb dust and wet mopping to absorb water and remove stains.

Frequently Asked Questions (FAQ)

Q1: What if the mop head hardens when dry?
The PVA foam mop head becomes soft upon contact with water. Simply soak it in water before use to allow it to regain its softness (original product information).

Q2: How do I wring it? Do I need to twist it by hand?
The folding wringing design allows you to wring the mop by simply pulling the handle, without the need to twist or wash the mop head by hand.

Q3: How do I replace the mop head?
The snap-fit installation requires no screwdriver; it can be attached, detached, and replaced by simply snapping it into place.

Q4: What kind of floors is it suitable for?
The product images show it being used on wooden floors and tiled floors. For valuable or specially coated floors, it is recommended to test it on a small area first.

Q5: What color is this model?
The product title indicates that this is the white model, and the main image (Image 1) shows the white version. The blue and orange colors shown in the other product images are illustrative images of the same product in different colors. The actual product shipped will be the white model.

Q6: How do I store it after use?
The end of the pole features a hanging hole, allowing it to be hung vertically to dry and reduce dampness.